#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
49f83937 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: softing: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
506df9dc |
|
02-Aug-2023 |
Shiji Yang <yangshiji66@outlook.com> |
treewide: rework linker symbol declarations in sections header 1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> |
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com> |
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
49f83937 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: softing: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
506df9dc |
|
02-Aug-2023 |
Shiji Yang <yangshiji66@outlook.com> |
treewide: rework linker symbol declarations in sections header 1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> |
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com> |
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
506df9dc |
|
02-Aug-2023 |
Shiji Yang <yangshiji66@outlook.com> |
treewide: rework linker symbol declarations in sections header 1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> |
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com> |
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
f3284e40 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200 The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
625bbd38 |
|
15-Jan-2020 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Clean up uSDHC4 setup Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ed22a883 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Align SOC and ARM LDO voltages The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
edaec532 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Repair PCIe support Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
26822fd2 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to ethernet DM Convert the board to ethernet DM support. Adjust board file accordingly, as the board_eth_init() contains custom clock configuration required for this board to work. Furthermore, enable FEC1 clock to make FEC1 work as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5b97abab |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DDR DRAM calibration Enable DRAM calibration in SPL to improve behavior of the board in edge conditions of the thermal envelope of the board and make it even more stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
7d84f446 |
|
26-Nov-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert to SPL framework In preparation for use of DDR DRAM fine-tuning upon boot, convert the board to SPL framework instead of using DCD tables to bring up DRAM and pinmux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
5255932f |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move some board functions out of common.h A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e37ac717 |
|
20-Jun-2019 |
Yangbo Lu <yangbo.lu@nxp.com> |
Convert to use fsl_esdhc_imx for i.MX platforms Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
|
#
74ae372a |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
0e0d38f4 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Enable DM GPIO Enable DM GPIO support on iMX6SX VINING|2000 and fix up board code where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
ac2b71f6 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: vining2000: Convert MMC and block to DM Enable DM block and DM MMC support on iMX6SX VINING|2000 . Convert board code to match the DM support. This disables USB mass storage support due to missing DM USB, however that will be re-enabled in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|
#
4c05e966 |
|
17-May-2019 |
Marek Vasut <marex@denx.de> |
ARM: imx: Rename VINING|2000 The company Samtec was merged into Softing, migrate the board over to the new name and update copyright headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
|