imx93: Move SoC and lifeclycle information to debug level

The following information printed on every boot is not very
helpful for the users:

SOC: 0xa0009300
LC: 0x40040

Move them to debug() level.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Mathieu Othacehe <othacehe@gnu.org>

arm: imx9: Correct imx9_probe_mu prototype

Since the event callback imx9_probe_mu is re-defined, update
its prototype.

Signed-off-by: Ye Li <ye.li@nxp.com>

imx9: Fix OP-TEE support

This fixes OP-TEE support by:

- Adding tee.bin to container.cfg
- Starting ELE RNG in SPL

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>

imx93: Use a header for imx9_probe_mu declaration

Put imx9_probe_mu declaration in a new mu.h header file.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support

Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
the PHYTEC phyCORE-i.MX93 SoM.

Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- FEC Ethernet
- debug UART
- watchdog

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>

arm: imx9: Correct imx9_probe_mu prototype

Since the event callback imx9_probe_mu is re-defined, update
its prototype.

Signed-off-by: Ye Li <ye.li@nxp.com>

imx9: Fix OP-TEE support

This fixes OP-TEE support by:

- Adding tee.bin to container.cfg
- Starting ELE RNG in SPL

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>

imx93: Use a header for imx9_probe_mu declaration

Put imx9_probe_mu declaration in a new mu.h header file.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support

Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
the PHYTEC phyCORE-i.MX93 SoM.

Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- FEC Ethernet
- debug UART
- watchdog

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>

imx9: Fix OP-TEE support

This fixes OP-TEE support by:

- Adding tee.bin to container.cfg
- Starting ELE RNG in SPL

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>

imx93: Use a header for imx9_probe_mu declaration

Put imx9_probe_mu declaration in a new mu.h header file.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support

Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
the PHYTEC phyCORE-i.MX93 SoM.

Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- FEC Ethernet
- debug UART
- watchdog

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>

imx93: Use a header for imx9_probe_mu declaration

Put imx9_probe_mu declaration in a new mu.h header file.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support

Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
the PHYTEC phyCORE-i.MX93 SoM.

Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- FEC Ethernet
- debug UART
- watchdog

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>