Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

mips: ocelot: Enable use of serial gpio for LED

This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

mips: mscc: luton+ocelot: Remove board config options, do probing

As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

MSCC: add board support for the Ocelots based evaluation boards

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: mscc: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

led: Drop led_default_state()

This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop linux/bitops.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move some board functions out of common.h

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

env: Drop environment.h header file where not needed

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

MIPS: mscc: ocelot: add switch reset support

On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>