#
9395eb05 |
|
15-Jun-2023 |
Peng Fan <peng.fan@nxp.com> |
imx: bootaux: change names of MACROs used to boot MCU on iMX devices The current bootaux supports i.MX8M and i.MX93, but the name "_M4_" implies that the SoCs have Cortex-M4. Actually i.MX8MM/Q use Cortex-M4, i.MX8MN/P use Cortex-M7, i.MX93 use Cortex-M33, so use "_MCU_" in place of "_M4_" to simplify the naming. Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> |
#
cccea188 |
|
06-Jun-2023 |
Masahisa Kojima <masahisa.kojima@linaro.org> |
efi_loader: add the number of image entries in efi_capsule_update_info The number of image array entries global variable is required to support EFI capsule update. This information is exposed as a num_image_type_guids variable, but this information should be included in the efi_capsule_update_info structure. This commit adds the num_images member in the efi_capsule_update_info structure. All board files supporting EFI capsule update are updated. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> |
#
71aa806d |
|
05-Feb-2023 |
Simon Glass <sjg@chromium.org> |
Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORT This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> |
#
5bc21d38 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for I2C display detection in environment script Enable the I2C bus and set a env variable for the reset GPIO of the touch controller. This allows us to probe the panel in a script. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
ba30cc22 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S This adds support for the Kontron Electronics SoM SL i.MX8MM OSM-S and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). The existing board configuration for the non-OSM SoM is reused and allows to detect the SoM variant at runtime. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3b846df8 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types This sets an env variable 'som_type' from the board code. It can later be used by environment scripts, e. g. to select the proper devicetree for the board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3f7f7316 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Enable environment in MMC In case we boot from SD card or eMMC, we also want to load the environment from the according boot device. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
741ef867 |
|
14-Apr-2022 |
Sughosh Ganu <sughosh.ganu@linaro.org> |
capsule: board: Add information needed for capsule updates Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> |
#
9cab87f1 |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> |
#
cccea188 |
|
06-Jun-2023 |
Masahisa Kojima <masahisa.kojima@linaro.org> |
efi_loader: add the number of image entries in efi_capsule_update_info The number of image array entries global variable is required to support EFI capsule update. This information is exposed as a num_image_type_guids variable, but this information should be included in the efi_capsule_update_info structure. This commit adds the num_images member in the efi_capsule_update_info structure. All board files supporting EFI capsule update are updated. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> |
#
71aa806d |
|
05-Feb-2023 |
Simon Glass <sjg@chromium.org> |
Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORT This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> |
#
5bc21d38 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for I2C display detection in environment script Enable the I2C bus and set a env variable for the reset GPIO of the touch controller. This allows us to probe the panel in a script. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
ba30cc22 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S This adds support for the Kontron Electronics SoM SL i.MX8MM OSM-S and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). The existing board configuration for the non-OSM SoM is reused and allows to detect the SoM variant at runtime. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3b846df8 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types This sets an env variable 'som_type' from the board code. It can later be used by environment scripts, e. g. to select the proper devicetree for the board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3f7f7316 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Enable environment in MMC In case we boot from SD card or eMMC, we also want to load the environment from the according boot device. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
741ef867 |
|
14-Apr-2022 |
Sughosh Ganu <sughosh.ganu@linaro.org> |
capsule: board: Add information needed for capsule updates Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> |
#
9cab87f1 |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> |
#
71aa806d |
|
05-Feb-2023 |
Simon Glass <sjg@chromium.org> |
Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORT This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> |
#
5bc21d38 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for I2C display detection in environment script Enable the I2C bus and set a env variable for the reset GPIO of the touch controller. This allows us to probe the panel in a script. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
ba30cc22 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S This adds support for the Kontron Electronics SoM SL i.MX8MM OSM-S and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). The existing board configuration for the non-OSM SoM is reused and allows to detect the SoM variant at runtime. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3b846df8 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types This sets an env variable 'som_type' from the board code. It can later be used by environment scripts, e. g. to select the proper devicetree for the board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3f7f7316 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Enable environment in MMC In case we boot from SD card or eMMC, we also want to load the environment from the according boot device. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
741ef867 |
|
14-Apr-2022 |
Sughosh Ganu <sughosh.ganu@linaro.org> |
capsule: board: Add information needed for capsule updates Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> |
#
9cab87f1 |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> |
#
5bc21d38 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for I2C display detection in environment script Enable the I2C bus and set a env variable for the reset GPIO of the touch controller. This allows us to probe the panel in a script. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
ba30cc22 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S This adds support for the Kontron Electronics SoM SL i.MX8MM OSM-S and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). The existing board configuration for the non-OSM SoM is reused and allows to detect the SoM variant at runtime. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3b846df8 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types This sets an env variable 'som_type' from the board code. It can later be used by environment scripts, e. g. to select the proper devicetree for the board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
3f7f7316 |
|
24-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: kontron-sl-mx8mm: Enable environment in MMC In case we boot from SD card or eMMC, we also want to load the environment from the according boot device. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de> |
#
741ef867 |
|
14-Apr-2022 |
Sughosh Ganu <sughosh.ganu@linaro.org> |
capsule: board: Add information needed for capsule updates Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> |
#
9cab87f1 |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> |
#
741ef867 |
|
14-Apr-2022 |
Sughosh Ganu <sughosh.ganu@linaro.org> |
capsule: board: Add information needed for capsule updates Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> |
#
9cab87f1 |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> |
#
9cab87f1 |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x) The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC. The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS, SD card, CAN, RS485 and much more. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> |