#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
ca5428cb |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: gdsys: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9a56ab96 |
|
23-Jul-2022 |
Tom Rini <trini@konsulko.com> |
powerpc: Move CONFIG_SYS_DDR_SIZE to CONFIG_SYS_SDRAM_SIZE We have a number of CONFIG_SYS_xxx_SIZE options to describe the amount main memory available. Rework CONFIG_SYS_DDR_SIZE, which described a size in number of MiB to use CONFIG_SYS_SDRAM_SIZE which is most often used as a number of bytes. Use shifts of this option when required. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
91527c9a |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
9b4a205f |
|
28-Dec-2019 |
Simon Glass <sjg@chromium.org> |
common: Move RAM-sizing functions to init.h These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
edba2b29 |
|
29-Mar-2019 |
Mario Six <mario.six@gdsys.cc> |
gdsys: mpc8308: Don't use manual RAM config if RAM driver is active The "manual" RAM configuration should not be used if the DM RAM driver is active, hence, disable the code if the CONFIG_MPC83XX_SDRAM config variable is defined. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
133ec602 |
|
21-Jan-2019 |
Mario Six <mario.six@gdsys.cc> |
mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
|
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f1683aa7 |
|
06-Apr-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
088454cd |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop return value from initdram() At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
52c41180 |
|
31-Mar-2017 |
Simon Glass <sjg@chromium.org> |
board_f: Drop board_type parameter from initdram() It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
|
#
50dcf89d |
|
13-Nov-2014 |
Dirk Eibach <dirk.eibach@gdsys.cc> |
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
|