Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: freescale: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

treewide: rework linker symbol declarations in sections header

1. Convert all linker symbols to char[] type so that we can get the
corresponding address by calling array name 'var' or its address
'&var'. In this way, we can avoid some potential issues[1].
2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has
not been referenced by any source code.
3. Move '__data_end' to the arch x86's own sections header as it's
only used by x86 arch.
4. Remove some duplicate declared linker symbols. Now we use the
standard header file to declare them.

[1] This patch fixes the boot failure on MIPS target. Error log:
SPL: Image overlaps SPL

Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

imx: move imx8 sci header file to include/firmware/imx

Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>

crypto/fsl: i.MX8: Enable Job ring driver model.

i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

board: freescale: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

treewide: rework linker symbol declarations in sections header

1. Convert all linker symbols to char[] type so that we can get the
corresponding address by calling array name 'var' or its address
'&var'. In this way, we can avoid some potential issues[1].
2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has
not been referenced by any source code.
3. Move '__data_end' to the arch x86's own sections header as it's
only used by x86 arch.
4. Remove some duplicate declared linker symbols. Now we use the
standard header file to declare them.

[1] This patch fixes the boot failure on MIPS target. Error log:
SPL: Image overlaps SPL

Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

imx: move imx8 sci header file to include/firmware/imx

Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>

crypto/fsl: i.MX8: Enable Job ring driver model.

i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

treewide: rework linker symbol declarations in sections header

1. Convert all linker symbols to char[] type so that we can get the
corresponding address by calling array name 'var' or its address
'&var'. In this way, we can avoid some potential issues[1].
2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has
not been referenced by any source code.
3. Move '__data_end' to the arch x86's own sections header as it's
only used by x86 arch.
4. Remove some duplicate declared linker symbols. Now we use the
standard header file to declare them.

[1] This patch fixes the boot failure on MIPS target. Error log:
SPL: Image overlaps SPL

Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

imx: move imx8 sci header file to include/firmware/imx

Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>

crypto/fsl: i.MX8: Enable Job ring driver model.

i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: move imx8 sci header file to include/firmware/imx

Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>

crypto/fsl: i.MX8: Enable Job ring driver model.

i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

crypto/fsl: i.MX8: Enable Job ring driver model.

i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: drop warning due to unused variable

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx8qxp: mek: enable dm-spl for pm

with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp: mek: default enable SPL

Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.

Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop init.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop image.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

imx: imx8qm/qxp: check whether m4 partition booted

Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot

Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8qxp_mek: Start with USDHC2 unpowered

After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT: Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>